By admin on October 21, 2019 0 Comments

The functions of the Line Out, Line In, and Microphone jacks change when you select the 6-channel audio configuration as shown in the following table. Move the jumper cap from pins default to pins At the DOS prompt, type the command line: You may install the USB module in the chassis front panel. Information to prevent damage to the components when trying to complete a task.

Uploader: Malak
Date Added: 17 January 2013
File Size: 25.16 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 11909
Price: Free* [*Free Regsitration Required]

When the system hangs due to overclocking, C.

Assign an IRQ to the card. This Mic pink jack connects a microphone. Plug the power cord and turn ON the computer.

This Line Out lime jack connects a headphone or a speaker. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

ASUS P4PE2-X driver – ASUS Sound Card Drivers – Linux_zip

Expansion slots 1 x AGP 4X 1. If you detect any damage, contact your dealer immediately. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

The System Panel connector is color-coded for easy and foolproof connection. Tips and additional information to aid in completing a task. Whenever you uninstall any component, place it on a grounded antistatic pad or audil the bag that came with the component. The motherboard delivers a host of new features and latest technologies making it audip standout in the long line of ASUS quality motherboards! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations.


Orient the red markings on the floppy ribbon cable to PIN 1. Product warranty or service will not be extended if: Turn OFF the computer and unplug the power cord.

Intel ASUS X Series P4PE2-X Motherboard REV (ASUSP4PE2XUAYZREV) |

Shut down and reboot the system so BIOS can automatically reset parameter settings to its previous values. When installing long AGP cards, it is recommended p4pe2x install the memory modules first.

Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. Extreme Overclocking The motherboard offers robust overclocking options to maximize your system performance. Auido this guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

When lit, this green LED indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. Unplug the power cord from the wall socket before touching any component.


Refer to the tables next page. Failure to do so may cause severe damage to the motherboard and other system components.

ASUS P4PE2-X Drivers

This prevents incorrect orientation when you connect the cables. Hold components by auvio edges to avoid touching the ICs on them. Use a grounded wrist strap or touch a safely grounded object or discharge any static electricity by touching the metal surface of the system chassis.

Do not overtighten the screws! These are not jumpers! This mark should match a specific corner on the socket to ensure correct installation. Move the jumper cap from pins default to pins The module has two USB 2. Otherwise, conflicts arise between the two PCI groups making the system unstable and the card inoperable.

Position the CPU above the socket such that its marked corner matches the base of the socket lever.